TM 9-6150-226-13
2-12. OPERATION IN EXTREME COLD (Below O°F [-18°C]).
WARNING
Do not touch cold metal parts with bare hands.
Frostbite
can cause permanent injury.
a. The DISE and PDISE equipment is designed for operation at -25°F (-
32°C).
b.
Cap unused connectors to protect against moisture.
c.
Close and latch the feeder/distribution center lids to protect
against moisture.
d.
When coiling cables, form large loops. Cables are difficult to coil
in subzero temperatures.
2-13.
OPERATION IN DUSTY OR SANDY AREAS.
a. Shield the
dust and sand.
Take
sand and dust.
b.
Cap unused
c.
Close and
DISE and PDISE feeder/distribution centers from blowing
advantage of natural barriers which offer protection from
connectors to protect against sand and dirt.
latch the feeder/distribution center lids to protect
against sand and dust.
2-14.
OPERATION IN RAINY OR HUMID CONDITIONS.
WARNING
High voltage is present in this system.
DISE and PDISE
supports equipment using 120/208 V ac.
Do not allow DISE
or PDISE feeder/distribution center or cable connectors to
be submerged in water.
Death or severe injury may result.
a.
Take special precautions to keep DISE and PDISE feeder/distribution
centers dry.
If possible, provide a shelter for the centers. If a sheltered
area is not available, cover the centers with canvas.
b.
Do not allow feeder/distribution centers or cable connectors to be
submerged in water.
c.
Cap unused connectors to protect against moisture.
d.
Close and latch the feeder/distribution centers lids to protect
against moisture.
2-58
