TM 9-6150-226-13
WARNING
High voltage is present in this system.
DISE/PDISE
supports equipment using 120/208 V ac.
Do not clean
components with the power on.
Death or serious injury may
result.
3-3.
INTRODUCTION.
DISE/PDISE equipment is designed for high reliability and low maintenance.
Operator maintenance
is limited to inspection
and cleaning of DISE/PDISE
equipment as
listed under operator
PMCS (Table 2-1) and replacement of
DISE/PDISE components.
Minor defects that do not render the DISE/PDISE
equipment inoperative or unsafe are acceptable.
3-4.
INSPECTION.
Inspect DISE/PDISE equipment in accordance with Table 2-1.
3-5.
REPAIR.
Operator repair
is limited to replacement of defective DISE/PDISE
components in the MAC.
a.
Troubleshooting
consists of isolating
the system in which the
malfunction occurs and locating the defective component, using testing devices
and tools identified in the Maintenance Allocation Chart.
b.
Any trouble
beyond the user
shall be referred to unit level
maintenance.
3-5/(3-6 blank)
