TM 9-6115-730-24
0101
REMOVAL
1. Disconnect hose (Figure 1, Item 1), hose (Figure 1, Item 2), and remove elbow (Figure 1, Item 3) and O-ring
(Figure 1, Item 4).
2. Remove two bolts (Figure 1, Item 5), washers (Figure 1, Item 6), fuel filter base (Figure 1, Item 7), and
preformed packing (Figure 1, Item 8).
3. Remove five bolts (Figure 1, Item 9), washers (Figure 1, Item 10), fuel manifold (Figure 1, Item 11), and six
O-rings (Figure 1, Item 12).
4. If necessary, remove plug (Figure 1, Item 13) and O-ring (Figure 1, Item 14), fitting (Figure 1, Item 15) and
O-ring (Figure 1, Item 16), or fitting (Figure 1, Item 17), O-ring (Figure 1, Item 18), and cover (Figure 1,
Item 19) from fuel filter base (Figure 1, Item 7).
5. If necessary, remove two plugs (Figure 1, Item 20) and O-rings (Figure 1, Item 21) or two plugs (Figure 1,
Item 22) and O-rings (Figure 1, Item 23) from fuel manifold (Figure 1, Item 11).
END OF TASK
INSTALLATION
1. If necessary, install plug (Figure 1, Item 13) and O-ring (Figure 1, Item 14), fitting (Figure 1, Item 15) and
O-ring (Figure 1, Item 16), or fitting (Figure 1, Item 17), O-ring (Figure 1, Item 18), and cover (Figure 1, Item
19) to fuel filter base (Figure 1, Item 7).
2. If necessary, install two plugs (Figure 1, Item 20) and O-rings (Figure 1, Item 21) or two plugs (Figure 1,
Item 22) and O-rings (Figure 1, Item 23) from fuel manifold (Figure 1, Item 11).
3. Install six O-rings (Figure 1, Item 12), fuel manifold (Figure 1, Item 11), five washers (Figure 1, Item 10), and
bolts (Figure 1, Item 9).
4. Install fuel filter base (Figure 1, Item 7), preformed packing (Figure 1, Item 8), two washers (Figure 1, Item 6),
and bolts (Figure 1, Item 5).
5. Install elbow (Figure 1, Item 3) and O-ring (Figure 1, Item 4). Connect hose (Figure 1, Item 2). Connect hose
(Figure 1, Item 1).
6. Connect fuel pressure sensor (WP 0098).
7. Install fuel filter (WP 0080).
8. Install fuel priming pump (WP 0078).
0101-2
