TM 9-6115-730-24
0065
INSTALLATION - Continued
6. Connect hose (Figure 1, Item 6) to bottom of surge tank (Figure 1, Item 4) and install hose clamp (Figure 1,
Item 5).
7. Pour coolant into COOLANT FILL and install fill cap (Figure 1, Item 1). If necessary, add coolant so level is
between HOT and COLD marks on coolant recovery system bottle.
WARNING
Operating the generator set with any access door open exposes personnel to a high noise level.
Hearing protection must be worn when operating or working near the generator set with any
access door open. Failure to comply can cause hearing damage to personnel.
8. Operate TQG and check for leaks.
9. Install right side access cover (WP 0029).
10. Close right rear doors and right front doors.
END OF TASK
END OF WORK PACKAGE
0065-4
