TM 9-6115-730-24
0040
INSTALLATION
1. Install door support bracket (Figure 1, Item 21), and secure with lockwasher (Figure 1, Item 20), washer
(Figure 1, Item 19), and screw (Figure 1, Item 18).
2. Install link (Figure 1, Item 17), screw (Figure 1, Item 16), two washers (Figure 1, Item 15), spacer (Figure 1,
Item 14), and locknut (Figure 1, Item 13).
3. Install door support bracket (Figure 1, Item 12), and secure with washer (Figure 1, Item 11), lockwasher
(Figure 1, Item 10), screw (Figure 1, Item 9), screw (Figure 1, Item 8), two washers (Figure 1, Item 7), spacer
(Figure 1, Item 6), and locknut (Figure 1, Item 5).
4. Install door support bracket (Figure 1, Item 9) on load board door (Figure 1, Item 1) with two lockwashers
(Figure 1, Item 4), washers (Figure 1, Item 3), and screws (Figure 1, Item 2).
5. Close load board door (Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0040-3/4 blank
