TM 9-6115-730-24
0032
REMOVAL
1.
Remove nine screws (Figure 1, Item 1), washers (Figure 1, Item 2), and lockwashers (Figure 1, Item 3) from
engine compartment ceiling assembly (Figure 1, item 4).
2.
Remove 41 screws (Figure 1, Item 5), lockwashers (Figure 1, Item 6), and washers (Figure 1, Item 7) from
engine compartment ceiling assembly (Figure 1, Item 4) (22 sets on the right side and 19 sets on the left).
3.
Remove two screws (Figure 1, Item 8), lockwashers (Figure 1, Item 9), and washers (Figure 1, Item 10)
securing bracket (Figure 1, Item 11) to air cleaner bracket (Figure 1, Item 12).
4. Remove engine generator compartment ceiling assembly (Figure 1, Item 4).
END OF TASK
DISASSEMBLY
1.
Remove sixteen nuts (Figure 1, Item 13), screws (Figure 1, Item 14), lockwashers (Figure 1, Item 15),
washers (Figure 1, Item 16) and two brackets (Figure 1, Item 17).
2.
If necessary, remove 126 clips (Figure 1, Item 18), 63 push-on nuts (Figure 1, Item 19) and remove foam
damping section.
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping section as template to cut new foam damping section. Install foam
damping section, 63 push-on nuts (Figure 1, Item 19), and 126 clips (Figure 1, Item 18).
2. Install two brackets (Figure 1, Item 17) using16 washers (Figure 1, Item 16), lockwashers (Figure 1, Item 15),
screws (Figure 1, Item 14), and nuts (Figure 1, Item 13).
END OF TASK
INSTALLATION
1. Install engine generator compartment ceiling assembly (Figure 1, Item 4).
2. Install bracket (Figure 1, Item 11) onto air cleaner bracket (Figure 1, Item 12) using two washers (Figure 1,
Item 10), lockwashers (Figure 1, Item 9), and screws (Figure 1, Item 8).
3. Install engine compartment ceiling assembly (Figure 1, Item 4) using 41 washers (Figure 1, Item 7),
lockwashers (Figure 1, Item 6), and screws (Figure 1, Item 5) (22 sets on the right side and 19 sets on the
left).
0032-2
