TM 9-6115-730-24
0031
DISASSEMBLY
1. Remove eight screws (Figure 1, Item 11), lockwashers (Figure 1, Item 12), and washers (Figure 1, Item 13)
four brackets (Figure 1, Item 14) and grate (Figure 1, Item 15).
2. If necessary, remove 40 clips (Figure 1, Item 16), 20 push-on nuts (Figure 1, Item 17), and remove five foam
damping sections as required.
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping sheets as templates to cut new foam damping sheets.
2. Install five foam damping sheets, 20 push-on nuts (Figure 1, Item 17), and 40 clips (Figure 1, Item 16).
3. Install grate (Figure 1, Item 15) and four brackets (Figure 1, Item 14) using eight screws (Figure 1, Item 11),
lockwashers (Figure 1, Item 12), and washers (Figure 1, Item 13).
END OF TASK
INSTALLATION
1. Install rear roof section housing assembly (Figure 1, Item 4).
2. Install nine screws (Figure 1, Item 8), lockwashers (Figure 1, Item 9), and washers (Figure 1, Item 10).
3. Install nine screws (Figure 1, Item 5), lockwashers (Figure 1, Item 6), and washers (Figure 1, Item 7).
4. Install 20 screws (Figure 1, Item 1), lockwashers (Figure 1, Item 2), and washers (Figure 1, Item 3).
5. Install front roof section housing assembly (WP 0030).
6. Install roof-mounted access covers (WP 0029).
END OF TASK
END OF WORK PACKAGE
0031-3/4 blank
