TM 9-6115-730-24
0010
TROUBLESHOOTING USING DVR FAULT CODES - Continued
SYMPTOM
1.
Code 0000 No Fault Present
MALFUNCTION
None
CORRECTIVE ACTION
None
SYMPTOM
2.
Code 601
MALFUNCTION
Internal Memory Failure
CORRECTIVE ACTION
STEP 1.
Set the ENGINE CONTROL switch to OFF/RESET to reset the fault (WP 0006).
STEP 2.
Set Battery Disconnect switch to ON. Set DEAD CRANK SWITCH to ON. Set
the ENGINE CONTROL Switch to COOL DOWN/STOP.
STEP 3.
Check all parameters between :01 and :38 (WP 0083). Verify the problem has
been resolved.
a. If fault reoccurs periodically, may be indication of failing battery. Check for
related failures and correct. Check for battery error codes on GSC. Codes
displaying FMI 04 indicate low voltage. Check batteries (WP 0050).
b. If the problem has not been resolved, check for additional DVR fault codes.
Correct any faults. Verify the problem has been resolved.
c.
If the problem has not been resolved, memory is failing in Digital Voltage
STEP 4.
Verify the problem is resolved.
0010-2