TM 9-6115-729-24
DIRECT SUPPORT (FIELD) LEVEL MAINTENANCE
TACTICAL QUIET GENERATOR 100 kW, 50/60 Hz MEP-807A/PU-807A
GENERATOR MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Shop Equipment, Automotive Maintenance,
Two
Common No. 1 (WP 0119, Item 2)
Shop Equipment, Field Maintenance, Basic
References
(WP 0119, Item 3)
TM 9-6115-729-24P
Materials/Parts
Equipment Condition
Breakthrough cleaning solvent (WP 0120, Item 47)
Grease (WP 0120, Item 23)
If necessary for disassembly/repair, generator
Technical alcohol (WP 0120, Item 4)
removed from generator set (WP 0097)
Wiping rags (WP 0120, Item 36)
WARNINGS
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
DO NOT wear loose clothing when performing checks, services and maintenance. Failure to
comply can cause injury or death to personnel.
High voltage is produced when this generator set is in operation. Make sure unit is completely shut
down and free of any power source before attempting any repair or maintenance on the unit.
Failure to comply can cause injury or death to personnel.
High voltage is produced when the generator set is in operation. Never attempt to start or
maintain the generator set unless it is properly grounded. Failure to comply can cause injury or
death to personnel.
WARNING
When running, generator set engine has hot metal surfaces that will burn flesh on contact. Shut
down generator set, and allow engine to cool before performing checks, services, and
maintenance. Wear gloves and additional protective clothing as required. Failure to comply can
cause injury or death to personnel.
CAUTION
All fittings and openings must be capped or plugged immediately after opening to prevent
contamination of the engine.
0096-1
