TM 9-6115-729-24
0090
Table 2. Generator Set Harness (Generator, Engine, Control Panel) Wire List.
NOTES
Color Code
0 Black
5 Green
1 Brown
6 Blue
2 Red
7 Violet
3 Orange
8 Gray
4 Yellow
9 White
Abbreviations used in table can be found in FO-1 at the back of this manual or in List of Abbreviations/Acronyms
The list below describes End Prep in Table 2:
Part Number
Nomenclature
Code
1
88-21944
Socket (18-16 AWG)
2
88-20274-1
Terminal, Spade 20 AWG, #6
3
88-20477
Contact, Electrical, Female
4
88-20274-3
Terminal, Spade 20 AWG, #8
5
88-20274-10
Terminal, Spade 12 AWG, #6
6
MS25036-158
Terminal Lug, Ring Tongue, 10 AWG
7
88-20274-5
Terminal, Spade 16 AWG, #6
8
401256-001
Terminal Lug, Push-on
9
0116-1215
Adapter, Terminal Disconnect
10
88-22119-19
Terminal Lug, Ring Tongue, 10-12 AWG
11
88-22119-21
Terminal Lug, Ring Tongue, 4AWG
13
MS25036-125
Terminal Lug, Ring Tongue, 4 AWG
14
0116-1224
Socket, Connector (18 - 14 AWG)
15
88-20274-9
Terminal, Spade 12 AWG, #8
16
88-20274-7
Terminal, Spade 12 AWG, #10
17
-
Solder to terminal
18
88-20274-11
Terminal, Spade 16 AWG, #8
19
88-22119-17
Terminal Lug, Ring Tongue
20
88-22119-18
Terminal Lug, Ring Tongue
21
MS25036-155
Terminal Lug, Ring Tongue, 16 AWG
22
MS25036-151
Terminal Lug, Ring Tongue, 20 AWG
23
0116-1232-02
Terminal, Pin, 16-14 AWG
24
88-22119-13
Terminal Lug, Ring Tongue
25
MS25036-105
Terminal Lug, Ring Tongue, 20 AWG
The list below describes Wire Type column in Table 2:
Nomenclature
Part Number
Wire Code
A
Wire, Electric, Extruded ETFE 14 Ga
M22759/16-14-9
B
Wire, Electric, Extruded ETFE 16 Ga
M22759/16-16-9
C
Wire, Electric, Extruded ETFE 18 Ga
M22759/16-18-9
D
Wire, Electric, Extruded ETFE 10 Ga
M22759/16-18-9
E
Wire, Electrical, 4 AWG
88-20540-10
