TM 9-6115-729-24
0067
INSTALLATION - Continued
10. Install fan and fan guards (WP 0065).
11. Install engine generator compartment ceiling assembly (WP 0031).
NOTE
Coolant system capacity is 38 quarts (34.5 liters).
12. Close drain valves (Figure 1, Sheet 1, Item 1) and (Figure 1, Sheet 1, Item 2). Refill cooling system with
coolant. Add coolant as required.
13. Set Battery Disconnect Switch to ON and DEAD CRANK SWITCH to ON. On EMCP set Engine Control
Switch (ECS) to START.
14. With engine running, check for leaks.
15. Close left front door and right front door.
END OF TASK
FLUSHING
For flushing of the cooling system, refer to procedures in TM 750-254, Cooling Systems: Tactical Vehicles.
END OF TASK
END OF WORK PACKAGE
0067-6
