TM 9-6115-729-24
0066
REMOVAL - Continued
12. Remove two hose clamps (Figure 1, Sheet 2, Item 39) and remove hose (Figure 1, Sheet 2, Item 40) from
surge tank and radiator. Remove fitting (Figure 1, Sheet 2, Item 41).
13. Remove two hose clamps (Figure 1, Sheet 1, Item 42) and remove hose (Figure 1, Sheet 1, Item 43) from
beneath surge tank and from elbow (Figure 1, Sheet 1, Item 44). Remove elbow (Figure 1, Sheet 1, Item 44)
and fitting (Figure 1, Sheet 1, Item 45) from engine.
14. Remove two hose clamps (Figure 1, Sheet 1, Item 46) and lower radiator hose (Figure 1, Sheet 1, Item 47).
END OF TASK
INSTALLATION
NOTE
Apply sealing compound to all male pipe threads before connecting.
1. At right side of engine, install lower radiator hose (Figure 1, Sheet 1, Item 47) and two hose clamps (Figure 1,
Sheet 1, Item 46).
2. Install fitting (Figure 1, Sheet 1, Item 45) and elbow (Figure 1, Sheet 1, Item 44) on engine. Install hose
(Figure 1, Sheet 1, Item 43) to elbow (Figure 1, Sheet 1, Item 44) and to bottom side of surge tank with two
hose clamps (Figure 1, Sheet 2, Item 42).
3. Install fitting (Figure 1, Sheet 2, Item 41) to right top side of radiator, and install hose (Figure 1, Sheet 2,
Item 40) to fitting (Figure 1, Sheet 2, Item 41) and to top of surge tank with two hose clamps (Figure 1,
Sheet 2, Item 39).
4. Install fitting (Figure 1, Sheet 2, Item 38) to right side of engine, and install hose (Figure 1, Sheet 2, Item 37) to
fitting (Figure 1, Sheet 2, Item 38) and to top of surge tank with two hose clamps (Figure 1, Sheet 2, Item 36).
5. Install radiator hose (Figure 1, Sheet 2, Item 35), radiator hose (Figure 1, Sheet 2, Item 34), and upper
radiator hose (Figure 1, Sheet 2, Item 32), four hose clamps (Figure 1, Sheet 2, Item 33), clamp (Figure 1,
Sheet 2, Item 31), screw (Figure 1, Sheet 2, Item 30), washer (Figure 1, Sheet 2, Item 29), and locknut
(Figure 1, Sheet 2, Item 28).
6. At lower right front of engine, install elbow (Figure 1, Sheet 1, Item 27), nipple (Figure 1, Sheet 1, Item 26),
drain valve (Figure 1, Sheet 1, Item 2), fitting (Figure 1, Sheet 1, Item 25), hose (Figure 1, Sheet 1, Item 24),
fitting (Figure 1, Sheet 1, Item 22), and two hose clamps (Figure 1, Sheet 1, Item 23).
7. Install hose (Figure 1, Sheet 1, Item 21) and hose clamp (Figure 1, Sheet 1, Item 20).
8. Connect hose (Figure 1, Sheet 1, Item 19) and install drain tee (Figure 1, Sheet 1, Item 9) and two hose
clamps (Figure 1, Sheet 1, Item 7).
9. At lower right rear of engine, install adapter fitting (Figure 1, Sheet 1, Item 17), nipple (Figure 1,
Sheet 1, Item 16), pipe plug (Figure 1, Sheet 1, Item 15), tee (Figure 1, Sheet 1, Item 14), reducer
bushing (Figure 1, Sheet 1, Item 13), and drain valve (Figure 1, Sheet 1, Item 1). Connect hose (Figure 1,
Sheet 1, Item 12) to drain tee (Figure 1, Sheet 1, Item 9) and to drain valve (Figure 1, Sheet 1, Item 1) with
hose clamp (Figure 1, Sheet 1, Item 11) and hose clamp (Figure 1, Sheet 1, Item 10).
0066-5
