TM 9-6115-729-24
0054
REMOVAL - Continued
5. To remove terminal board TB5 (Figure 1, Sheet 1, Item 12), tag and disconnect wires from terminal board,
remove two nuts (Figure 1, Sheet 1, Item 13), screws (Figure 1, Sheet 1, Item 14), terminal board (Figure 1,
Sheet 1, Item 12), and strip (Figure 1, Sheet 1, Item 17). Tag jumpers (Figure 1, Sheet 1, Item 15) locations.
Remove screws (Figure 1, Sheet 1, Item 16) and jumpers (Figure 1, Sheet 1, Item 15).
6. To remove either switch CATSW1 (Figure 1, Sheet 2, Item 18) or switch CATSW2 (Figure 1, Sheet 2, Item 19),
tag and disconnect wires from switch, remove nut (Figure 1, Sheet 2, Item 20), lockwasher (Figure 1, Sheet 2,
Item 21), and switch.
7. To remove slave relay SRY (Figure 1, Sheet 1, Item 22), tag and disconnect wires from relay, remove screw
(Figure 1, Sheet 1, Item 23), washer (Figure 1, Sheet 1, Item 24), lockwasher (Figure 1, Sheet 1, Item 25), and
relay.
8. To remove starter motor magnetic switch (SMMS) relay (Figure 1, Sheet 1, Item 26), tag and disconnect wires
from SMMS relay, remove two screws (Figure 1, Sheet 1, Item 27), washers (Figure 1, Sheet 1, Item 28),
lockwashers (Figure 1, Sheet 1, Item 29), and SMMS relay.
9. To remove any of three fuses F1, F2, and F3 (Figure 1, Sheet 2, Item 30), pull fuse out of fuseholder (Figure 1,
Sheet 2, Item 31). To remove fuseholder (Figure 1, Sheet 2, Item 31), remove two screws (Figure 1, Sheet 2,
Item 32), washers (Figure 1, Sheet 2, Item 33), clips (Figure 1, Sheet 2, Item 34), fuseholder, and two
insulators (Figure 1, Sheet 2, Item 35).
10. To remove fuseholder track (Figure 1, Sheet 2, Item 36), remove two screws (Figure 1, Sheet 2, Item 37),
washers (Figure 1, Sheet 2, Item 38), lockwashers (Figure 1, Sheet 2, Item 39), and track.
11. Two remove ammeter shunt R4 (Figure 1, Sheet 1, Item 40), tag and disconnect wires from shunt, remove two
screws (Figure 1, Sheet 1, Item 41) and shunt.
12. To remove diode D1 (Figure 1, Sheet 3, Item 42), tag and disconnect wires from diode, remove two screws
(Figure 1, Sheet 3, Item 43), washers (Figure 1, Sheet 3, Item 44), lockwashers (Figure 1, Sheet 3, Item 45),
insulator (Figure 1, Sheet 3, Item 46), and diode. Remove nut (Figure 1, Sheet 3, Item 47), and diode from
insulator.
13. To remove circuit breaker CB5 (Figure 1, Sheet 3, Item 47) or CB2 (Figure 1, Sheet 3, Item 48), remove two
screws (Figure 1, Sheet 3, Item 49), washers (Figure 1, Sheet 3, Item 50), lockwashers (Figure 1, Sheet 3,
Item 51), and circuit breaker.
14. To remove circuit breaker CB4 (Figure 1, Sheet 3, Item 52), remove two screws (Figure 1, Sheet 3, Item 53),
washers (Figure 1, Sheet 3, Item 54), lockwashers (Figure 1, Sheet 3, Item 55), nut (Figure 1, Sheet 3,
Item 56), and circuit breaker.
15. To remove brackets (Figure 1, Sheet 3, Item 57) for CB5, CB4, or CB2, remove two screws (Figure 1,
Sheet 3, Item 58), washers (Figure 1, Sheet 3, Item 59), lockwashers (Figure 1, Sheet 3, Item 60), and
bracket.
16. Remove three spare fuses (Figure 1, Sheet 1, Item 61), two nuts (Figure 1, Sheet 1, Item 62), two screws
(Figure 1, Sheet 1, Item 63), and spare fuseholder (Figure 1, Sheet 1, Item 64).
END OF TASK
0054-6
