TM 9-6115-729-24
0024
DISASSEMBLY - Continued
3. Remove nut (Figure 1, Item 10), screw (Figure 1, Item 11), wrench (Figure 1, Item 12), cord (Figure 1, Item
13), and hinge (Figure 1, Item 14).
4. Remove four nuts (Figure 1, Item 15), screws (Figure 1, Item 16), and wrench mounting plate (Figure 1, Item
17).
5. Remove foam damping sheet as required.
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping sheet as template to cut new foam damping sheet.
2. Install foam damping sheet.
3. Install wrench mounting plate (Figure 1, Item 17), four screws (Figure 1, Item 16) and nuts (Figure 1, Item 15).
4. Install cord (Figure 1, Item 13), hinge (Figure 1, Item 14), and wrench (Figure 1, Item 12), and secure with
screw (Figure 1, Item 11) and nut (Figure 1, Item 10).
5. Install latch (Figure 1, Item 1) and secure with four screws (Figure 1, Item 9) and nuts (Figure 1, Item 8).
6. Install three screws (Figure 1, Item 7) and nuts (Figure 1, Item 6).
END OF TASK
INSTALLATION
1. Install load board door assembly and hinge (Figure 1, Item 2) and secure with four lockwashers (Figure 1,
Item 5), washers (Figure 1, Item 4), and screws (Figure 1, Item 3).
2. Close load board door assembly (Figure 1, Item 2) and secure by rotating and closing latch (Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0024-3/4 blank