TM 9-6115-729-24
0011
TROUBLESHOOTING FAILURES WITHOUT FAULT CODES - Continued
MALFUNCTION
Fuel in Engine Oil.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Refer to Fuel in Engine Oil procedure troubleshooting procedure (SYMPTOM
43).
MALFUNCTION
Camshaft or Crankshaft Defective.
CORRECTIVE ACTION
STEP 1.
If the camshaft of crankshaft is suspected of being defective, replace the engine
STEP 2.
Verify the problem has been resolved.
SYMPTOM
46.
Mechanical Noise (Knock) in Engine.
MALFUNCTION
Valve Train Components Defective.
CORRECTIVE ACTION
STEP 1.
Inspect the valve train components.
STEP 2.
Replace damaged components, if necessary (WP 0115).
STEP 3.
If components are not damaged or worn, perform valve lash adjustment
STEP 4.
Verify the problem has been resolved.
MALFUNCTION
Internal Engine Problem.
CORRECTIVE ACTION
STEP 1.
Replace the engine (WP 0098).
STEP 2.
Verify the problem has been resolved.
0011-59
