ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
1.5.
PREPARATION FOR STORAGE OR SHIPMENT.
Refer to TB 740-97-2/TO 35-1-4 for procedures to place the generator set into storage. Refer to ASTM D 3951-98 for
procedures on preparing the generator set for shipment.
QUALITY ASSURANCE (QA).
Where applicable, Quality Assurance (QA) requirements have been incorporated into the technical manual. When
required, each procedure, paragraph or step in this manual requiring quality assurance is preceded and highlighted by
the designation "(QA)".
1.7.
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR).
If your generator set needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell
us what you don't like about your equipment. Let us know why you don't like the design or performance. Put it on an
SF 368 (Product Quality Deficiency Report). EIRs should be mailed directly to:
Commander
U.S. Army Communications and Electronics Command
ATTN: AMSEL-LC-LEO-D-CS-CFO
Fort Monmouth, New Jersey 07703-5000
A reply will be furnished to you.
1.7.1.
(N) Put it on an applicable Navy form and mail it directly to:
Naval Construction Battalion Center
ATTN: CODE 157 Civil Engineer
Support Office (CESO)
Port Hueneme, CA 93043-5000
A reply will be furnished to you.
1.7.2. (F) USAF Deficiency Reporting and Investigating System, TO 00-35D-54, Appendix A procedures will be used
for electronic submission. Submit mailed forms to:
SMALC/LIIAD
5029 Dudley Boulevard
McClellan AFB, CA 95652-1095
A reply will be furnished to you.
1.7.3 (MC) Quality Deficiency Report (QDR) shall be submitted on SF 368 in accordance with MCO 4855.10.
Submit directly to:
Commander
Marine Corps Logistics Bases
(CODE 856)
Albany, GA. 31704-5000
A reply will be furnished to you.
