ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
3-24
(3)
Position suitable container under crankcase breather filter assembly (3, Figure 3-2), loosen drain
valve (4), and drain fluid into a suitable container . Tighten drain valve.
(4)
Close engine compartment access doors.
3.3.5
Engine Cooling System.
a. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open both right and left sets of engine compartment access doors (Figure 1-2 and 1-3).
__________
WARNING
Cooling system operates at high temperature and pressure. Contact with
high pressure steam and/or liquids can result in burns and scalding. Shut
down generator set, and allow system to cool before performing checks,
services, and maintenance. Failure to use caution can cause injury or death
to personnel.
(3)
Check radiator for dirt, leaves, insects and other blockage inhibiting air flow.
(4)
Check radiator and hoses for leaks, loose connections, loose mountings, corrosion, chafing, and
missing parts.
(5)
Check coolant level on coolant recovery (overflow) bottle (1, Figure 3-3).
(6)
Close engine access doors.
b. Service.
__________
WARNING
Cooling system operates at high temperature and pressure. Contact with
high pressure steam and/or liquids can result in burns and scalding. Shut
down generator set, and allow system to cool before performing checks,
services, and maintenance. Failure to use caution can cause injury or death
to personnel.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open right side engine compartment access doors (Figure 1-2).
(3)
Remove cap (2, Figure 3-3) from coolant recovery (overflow) bottle (1).
(4)
Fill coolant recovery (overflow) bottle (1) to HOT line if engine is hot, COLD if engine is
cooled down, with proper coolant/antifreeze in accordance with Table 3-2.
(5)
Install cap (2) on coolant recover (overflow) bottle (1).
(6)
Close engine compartment access doors.
