ARMY TM 9-6115-670-14&P
6-24
6.11. SPEED CONTROL PLATE.
This task covers: Replace
INITIAL SETUP
Tools
General Mechanic's Tool Kit
(Item 1, Appendix B)
Equipment Conditions
Engine off and allowed to cool for 30 minutes.
Materials/Parts
Speed Control Plate
Sealing Compound
(Item 18, Appendix F)
MASTER ON-OFF switch on APU controller set to
OFF.
Actuator linkage removed (para 4.50.).
REPLACE
a. Remove four bolts and washers (1, Figure 6-8) securing speed control plate (2) to engine.
b. Carefully separate speed control plate (2) from engine, but DO NOT REMOVE.
c. Disconnect speed control plate spring (4) from lever (3) on under side of speed control plate
(2).
d. Remove speed control plate (2) and clean parts to be reinstalled.
e. Apply sealing compound to new speed control plate (2).
f. Connect loose end of speed control plate spring (4) to lever (3) on under side of speed control
plate (2).
g. Install speed control plate (2) and secure with four washers and bolts (1).
CAUTION
When separating speed control plate from engine body,
take care not to damage the speed control plate spring.
