ARMY TM 9-6115-670-14&P
6-17
6.8. VALVE GUIDE.
This task covers: Replace
INITIAL SETUP
Tools
Valve Guide Replacing Tool
(Item 15, Appendix B)
Reamer (special tool)
(Item 32, Appendix B)
Equipment Conditions
Cylinder head removed (para 6.5.).
Valves removed (para 6.7.).
Materials/Parts
Lubricating Oil
Valve Guide
REPLACE
a. Press valve guide (3, Figure 6-5) out of cylinder head (2) with a valve guide replacing tool (1).
b. Clean and apply lubricating oil to new valve guide.
c. Using a valve guide replacing tool (1), press valve guide (3) into cylinder head (2) until flush
with the cylinder head (2).
d. Use reamer to ream the ID of valve guide between 0.23661 and 0.23721 in. (6.010 and 6.025
mm).
CAUTION
Do not use a hammer or similar instrument to strike the
valve guide during replacement.
