TM 9-6115-670-14&P
5-29
5.9. OIL PAN STRAINER.
This task covers: Replace
INITIAL SETUP
Tools
General Mechanic's Tool Kit
(Item 1, Appendix B)
Torque Wrench
(Item 2, Appendix B)
Equipment Condition
Engine stopped and allowed to cool completely.
MASTER ON-OFF switch on APU control unit set
to OFF.
Oil pan removed (para 5.8.).
Materials/Parts
Oil Pan Strainer
Preformed Packing
(Item 20, Appendix J)
REPLACE
a. Remove and tag two bolts (2 and 6, Figure 5-3) securing oil pan strainer (1) to engine block.
b. Remove oil pan strainer (1) and preformed gasket (5).
c. Install new oil pan strainer (1) and new preformed gasket (5).
d. Secure bolt (2) in mounting hole marked "3" (4) and torque between 13.0 and 15.2 ft-lbs (17.7
and 20.6 Nm).
e. Secure bolt (6) in mounting hole marked "2" (3) and torque between 13.0 and 15.2 ft-lbs (17.7
and 20.6 Nm).
CAUTION
Do not switch bolts (2 and 6). Install bolts (2 and 6)
into their original positions.