ARMY TM 9-6115-670-14&P
4-162
4.64. CYLINDER HEAD COVER (VALVE COVER).
This task covers:
a. Replace
INITIAL SETUP
Tools
General Mechanic's Tool Kit
(Item 1, Appendix B)
Torque Wrench
(Item 2, Appendix B)
Equipment Condition
Engine stopped and allowed to cool completely.
MASTER ON/OFF switch off on APU control unit set
to OFF.
Air intake pipe removed (para 4.47.).
Materials/Parts
Cylinder Head Cover
Cylinder Head Cover Gasket
REPLACE
a. Remove three cap nuts, washer gaskets (1), and cylinder head cover (2).
b. Remove cylinder head cover gasket (3).
c. Install cylinder head cover gasket (3).
d. Align three mounting studs (4) with holes in cylinder head cover (2) and install cylinder head cover (2).
e. Secure cylinder head cover (2) with three cap nuts and three washer gaskets (1). Torque between 2.9
and 4.3 ft-lbs (3.9 to 5.9 Nm).
