ARMY TM 9-6115-670-14&P
4-155
f. Position push button in APU control unit front panel mounting hole. Secure push button (2) to front
panel with nut (5).
g. Install red knob (6) over nut (5) and secure by turning cw.
h. At rear of push button, connect terminal leads (4) with screws (3). Tighten screws (3). Remove
tags.
i. Secure APU control unit cover to chassis with ten screws (caged nuts (SICPS), machine screws
(JTACS and WIN-T)) (1).
j. Install APU control unit.
Figure 4-48. Emergency Shut-Down Switch
