ARMY TM 9-6115-670-14&P
4-91
4.35. FUEL LINES AND FITTINGS (JTACS, SICPS, and WIN-T).
This task covers:
a. Inspect
b. Replace
INITIAL SETUP
Tools
General Mechanic's Tool Kit
(Item 1, Appendix B)
Gloves, Chemical and Oil Protective
(Item 34, Appendix B)
Equipment Conditions
Engine stopped and allowed to cool completely.
MASTER ON-OFF switch on APU control unit set to
OFF.
Materials/Parts
Fuel Lines
Fittings
Strap, Tiedown, Elect.
(Item 22, Appendix F)
INSPECT
a. Inspect fuel lines for deterioration, crimping, corrosion, chafing, or damage.
b. Replace all deteriorated, crimped, corroded, chafed, or damaged fuel lines.
REPLACE
WARNING
Ensure that NO IGNITION SOURCE is within 50 feet of
the 10 kW APU. The fuel in this APU is highly flammable.
Do not smoke. Do not splash fuel on hot components.
Failure to heed this warning could result in serious
injuries to personnel or DEATH.
WARNING
Avoid fuel contact with skin. Wear protective gloves,
goggles, apron and mask, while disconnecting fuel lines.
Failure to heed this warning could result in serious
injuries to personnel or DEATH.
CAUTION
Take care not to cut wires or other APU components
when cutting and removing tiedown straps.
