TM 9-6115-669-13&P
(1)
When voltage U = +24 VDC is applied, relay contact R switches immediately to the on
position and time t begins.
(2)
When time t has elapsed, the relay drops back to the off position (see also time
diagram on the relay).
(3)
Cut off voltage U = +24 VDC before time t has elapsed. Relay contact will immediately
fall back into the off position.
a.
Hook wipe relay (6) into the mounting bar and push on.
b.
Install cables to wipe relay K13 (6).
NOTE
Make sure that jumper (7) is connected.
c. Remove stanchion.
d.
Stow prop (3), close access door (2) and secure.
e.
Install stanchion by PDU (1).
5-42
