TM 9-6115-664-13&P
d.
CAGEC (Column (4)). The Commercial and Government Entity Code (CAGEC) is a 6-digit numeric code which
is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
e.
Part Number (Column (5)). Indicates the primary number used by the manufacturer (individual company, firm,
corporation. or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.
NOTE
When you use an NSN to requisition an item, the item you receive may have a
different part number from the part ordered.
f.
Description and Usable on Code (UOC) (Column (6)). This column includes the following information:
(1)
The Federal item name and, when required, a minimum description to identify the item.
(2)
The physical security classification of the item is indicated by the parenthetical entry (insert applicable
physical security classification abbreviation, e.g., Phy Sec C1 (C) Confidential, Phy Sec C1 (S) Secret, Phy Sec C1 (T)
Top Secret).
(3)
Items that are included in kits and sets are listed below the name of the kit or set.
(4)
Spare/repair parts that make up an assembled item are listed immediately following the assembled item line
entry.
(5)
Part numbers for bulk materials are referenced in this column in the line entry for the item to be
manufactured/fabricated.
(6)
When the item is not used with all serial numbers of the same model, the effective serial numbers are
shown on the last line of the description (before UOC).
(7)
Usable on code, when applicable (para 5).
(8)
in the Special Tools section, the basis of issue (BOI) appears as the last line in the entry for each special
tool, special TMDE, and other special support equipment. When density of equipments supported exceeds density
spread indicated in the basis of issue, the total authorization is increased proportionately.
(9)
The statement "END OF FIGURE" appears just below the last item description in Column (5) for a given
figure in both Section II and Section III.
g.
Qty (Column (7)). Indicates the quantity of the item used in the breakout shown on the illustration figure, which is
prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a quantity
indicates that the quantity is variable and the quantity may vary from application to application.
G-5