TM 9-6115-653-14&P
NOTE
Two center mounting screws on each side can be reached through cutouts in
trailer frame under each fender The beveled washers (5) may have been
welded in place
Figure 5-3. Detaching Generator Set from Trailer.
(2) Remove eight screws (4), eight beveled washers (5), eight flat washers (6) and eight
nuts (7) securing
generator set (2) to trailer.
WARNING
When lifting generator set, use lifting equipment with a minimum lifting
capacity of 3500 lb. Do not stand under generator while it is being lifted Do
not permit generator set to swing Failure to observe these precautions can
cause Injury to personnel or damage to equipment.
(3) Attach lifting equipment with a minimum letting capacity of 3500 lb (1, figure 5-4) to both
lifting eyes (2) on
top edges of generator set (3) Insert a rope (4) through each of four
tiedown rings (5) on generator set.
(4) With one person at each rope to steady and guide generator set (3), lift generator set off
of trailer.
5-3
