TM 9-6115-653-14&P
CHAPTER 3
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
3-1.
Consumable Supplies. Consumable supplies used In the maintenance and operation of the power unit are listed
In Table 3-1.
Table 3-1. Consumable Operating and Maintenance Supplies
(1)
Component
application
(2)
National
stock number
(3)
Description
(4)
Qty
req. for
initial
operation
(5)
Qty
req. 8 hrs.
operation
(6)
Note
s
General
Cleaning
6850-00-664-5685
Solvent, Drycleaning, PD-680
1 quart
As required
Personnel
Platform
9150-00-186-6681
Oil Lubricating, OE/HDO-30
1 quart
As required
9150-00-402-4478
Oil, Lubricating, OEA
1 quart
As required
Section II. LUBRICATION INSTRUCTIONS
3-2.
General. Detailed Instructions for the lubrication of the major components of the power unit are contained In the
applicable Lubrication Orders (LO's). Refer to DA Pam 25-30 to ensure the latest editions of the LO's are used.
3-3.
Generator Lubrication. Refer to TM 5-6115-464-12 for generator set Lubrication Order.
3-4.
Trailer Lubrication. There are no operator/crew lubrication requirements for the power unit trailer.
Section III. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
NOTE
The PMCS chart in this section contains all necessary Operator/Crew preventive
maintenance checks and services for this equipment.
3-5.
General. The preventive maintenance checks and services listed in Table 3-2 are grouped according to stages of
equipment operation or time intervals. Using the following as a guide, do the checks and services at the intervals shown.
a.
Before you operate, perform your before (B) PMCS. Observe all CAUTIONS and WARNINGS
3-1
