Figure 5-2. Section Ill. Power Unit Markings

CHAPTER 5 DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS - TM-9-6115-651-14P_61

Figure 5-3. Detaching Generator Set from Trailer. - TM-9-6115-651-14P_63

TM-9-6115-651-14P Power Unit PU-650B/G (NSN 6115-00-258-1622) MEP-006A 60 kw 60 Hz Generator Set M200A1 2-Wheel 4-Tire Modified Trailer Manual
Page Navigation
52

TM 9-6115-651-14&P 5-4. Marking. (See figure 5-2.) The power unit four-digit registration number, preceded by the prefix "VB" and the words "U.S. ARMY", is marked in three places on power unit trailer. Marking is done in accordance with MIL-STD-642. On the fender, over each wheel, “T.P. 35 PSI” is marked in 1.00 + .12 inch high characters in accordance with MIL-STD-130. Figure 5-2 shows the approximate location of markings on power unit. If required, touch-up painting of the base color shall be done in accordance with MIL-T-704, Type F, Color Green, No. 383 of MIL-C-46168. When power unit has been previously painted in camouflage, any touch-up painting following repairs must match authorized patterns and colors as specified in TB 43-0147. Application of camouflage paint shall be done in accordance with MIL-C-53072. Figure 5-2. Section Ill. Power Unit Markings. GENERATOR SET 5-5. Generator Set Replacement. (See figures 5-3 and 5-4). a. Removal. (1) Disconnect ground wire (1, figure 5-3) from generator set (2) to GROUND TERMINAL stud (3) on trailer. 5-2

Privacy Statement
Press Release
Contact