Figure 4-11. Personnel Platform Replacement.
If mounting brackets have not been removed, omit step (1).
Position each mounting bracket (5) on trailer frame (10). Insert three screws (7) through frame into each
bracket. Install one washer (8) and one self-locking nut (9) on each screw and tighten.
Holding platform (4) in vertical position, position platform on mounting brackets (5) so that holes in
platform line up with holes in brackets and install platform anchors (6) in upper mounting hole on each
side of platform.
Secure platform (4) to brackets (5) with two screws (1), four flat washers (2) and two self-locking