FIGURE 3-10.
ARMY TM 9-6115-645-24
AIR FORCE TO 35C2-3-444-12
MARINE CORPS TM 09244A/09245A-24/2
ai.
aj.
ak.
al.
am.
an.
ao.
ap.
aq.
Loosen clamp (1, FIGURE 3-10) and disconnect oil drain hose (2) from adapter (3).
On left side of engine, tag and disconnect electrical leads from coolant high temperature switch (1,
FIGURE 3-11), low oil pressure switch (2), oil pressure sender (3), coolant temperature sender (4), magnetic
pickup (5), DEAD CRANK switch (6), and fuel injection pump (7).
Remove nut (8) from rod end (9). Loosen nuts (10) and remove governor actuator assembly (11) with wiring
harness attached. Place out of the way.
Loosen clamp (12) and disconnect coolant drain hose (13) from engine block coolant drain valve (14).
Remove bolt (15) and Iockwasher (16) securing fuel return line (17) to engine block.
Disconnect fuel line (17) at injectors excess fuel line, and fuel hose (18) at fuel tank. Remove line (17) and hose
(18) as an assembly, Cap openings.
Open right side engine access doors, tag and disconnect electrical leads from battery charging alternator (1,
FIGURE 3-12), starter solenoid (2) and starter motor (3).
Disconnect fuel line (4) at fuel pump (5). Cap openings.
Disconnect tube (6) from ether start spray nozzle (7) at intake manifold.
3-16
