ARMY TM 9-6115-644-24P
AIR FORCE TO 35C2-3-446-14
MARINE CORPS TM 09249A,09246A-24P/3
Explanation of Columns (Section IV). - (Continued)
(1) FSCM Column.
Manufacturer (FSCM) is a s-digit numeric code used to identify the
distributor, or Government
supplies the item.
(2) PART NUMBER Column
Indicates the primary number
used by the
Government activity), which controls the design and characteristics
of the item by means of its engineering drawings, specifications
standards, and inspection requirements to identify an item or range
(3) STOCK NUMBER Column, This column lists the NSN for
the associated part number and manufacturer identified in the PART
NUMBER and FSCM columns to the left.
(4) FIG. Column, This column lists the number of the
figure where the item is identified/located in Section II and III.
(5) ITEM Column.
The item number is that number
assigned to the item as it appears in the figure referenced in the
adjacent figure number column.
5. Special Information.
Use the following subparagraphs as
USABLE ON CODE. The usable on code appears in the lower
left corner of the Description column heading.
Usable on codes are
shown as "UOC: . . .
applicable item description/nomenclature.
Uncoded items are applicable to all models.
Identification of the
usable on codes used in the RPSTL are:
30kW, 50/60 Hz Generator Set,
30kW, 400 Hz Generator Set,
Bulk materials required to
manufacture items are listed in the Bulk Material Functional Group
of this RPSTL.
Part numbers for bulk materials are also referenced
in the description column of the line item entry for the item to be
Detailed fabrication instructions for
item source codes to be manufactured or fabricated are found in