5305-01-674-1467
ARMY TM 9-6115-644-24P
AIR FORCE TO 35C2-3-446-14
MARINE CORPS TM 09249A/09246A-24P/3
3.
Explanation of Columns (Sections II and III) .
- (Continued)
(7) In the Special Tools List section, the Basis of
Issue (BOI) appears as the last line(s) in the entry for each
special tool, special TMDE,
When density of
equipments
and other special support equipment.
supported
exceeds
indicated in
density
spread
the BOI,
the
total authorization is
increased
proportionately.
(8) The statement "END OF FIGURE" appears just below
the last item description in Column 5 for a given figure in Section
II.
f.
QTY (Column (6)). The QTY (quantity per figure column)
indicates the quantity of the item used in the breakout shown on
the illustration figure, which is prepared for a functional group,
subfunctional group, or an assembly. A "V" appearing in this
column in lieu of a quantity may
application.
vary from application to
4.
Explanation of Columns (Section IV).
a.
RATIONAL STOCK NUMBER (NSN) INDEX,
(1) STOCK NUMBER Column.
This column lists the NSN by
National Item Identification Number (NIIN) sequence.
The NIIN
consists of the last nine digits of the NSN
When using this column to locate an
item, ignore the first 4 digits of the NSN.
However, the complete
NSN should be used when ordering items by stock number.
(2) FIG. Column.
This column lists the number of the
figure where the item is identified/located.
numerical order in Section II and Section III.
The figures are in
(3) ITEM Column.
The item number identifies the item
associated with the figure listed in the adjacent FIG. Column.
This item is also identified by the NSN listed on the same line,
b.
PART NUMBER INDEX, Part numbers in this index are listed
by part number in ascending alphanumeric sequence (i.e., vertical
arrangement of letter and number combination which places the first
letter or digit of each group in order A through Z, followed by
numbers 0 through 9 and each following letter or digit in like
order).
8
