ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
4-24-2 Removal.
a. Shutdown generator set.
b. Remove generator assembly from generator set, paragraph 4-17-1.
c. Remove generator rotor assembly, paragraph 4-23-2.
d. Remove lifting eye (29, FIGURE 4-14) and nut (30) from generator housing (11).
e. Remove bolts (31), Iockwashers (32), lead damp assembly (33), and gasket (34) from generator housing (11).
f.
Remove nuts (35), Iockwashers (36), screws (37), washers (38), and cover/screen (39) from generator
housing (11).
4-24-3 Installation.
a.
Install generator rotor assembly, paragraph 4-23-3.
b. Install cover/screen (39, FIGURE 4-14) on generator housing (11) with screws (37), washers (38),
Iockwashers (36), and nuts (35).
c.
Install gasket (34) and lead clamp assembly (33) on generator housing (11) with bolts (31) and Iockwashers (32).
d. Install lifting eye (29) in generator housing (11) and tighten nut (30).
e.
Install generator assembly in generator set, paragraph 4-17-2.
S e c t i o n V I l . M A I N T E N A N C E O F S K I D B A SE
4-25 SKID BASE.
4-25-1 Removal.
a.
Shut down generator set.
b. Remove engine and generator assembly, paragraph 3-6-1.
c.
Remove fuel tank, paragraph 4-7-2.
d. Remove nuts (1, FIGURE 4-16), Iockwashers (2), bolts (3), washers (4), and forklift guides (5) from skid base.
e.
Remove cable grommets (6) and (7) from skid base.
4-25-2 Repair. Repair of the skid base will be limited to corrosion control and spot welding minor cracks. If major structural
damage to the skid base has occurred, replace the skid base.
4-25-3 Installation.
a.
Install fork lift guides (5, FIGURE 4-16) in skid base with bolts (3), washers (4), Iockwashers (2), and nuts (1).
b. Install cable grommets (6) and (7) in skid base.
c.
Install fuel tank, paragraph 4-7-3.
d. Install engine and generator assembly, paragraph 3-6-2.
4 - 4 5
