ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
4.31.3 Installation.
a. Install main stator (34, FIGURE 4-15) in housing assembly (10) with setscrews (33).
b. Pull main stator (34) leads through side of housing (10).
c. Position exciter stator (17) leads and main stator (34) leads through gasket (38) and in lead clamp assembly (37).
d. Install gasket (38) and lead clamp assembly (37) on housing (10) with bolts (35) and Iockwashers (36).
e. Install main rotor and attached rotating components, paragraph 4.30.3.
f. Install generator assembly in generator set, paragraph 4.16.2.
4.32 GENERATOR HOUSING (MEP-814A).
4.32.1 Removal.
a. Shut down generator set.
b. Remove generator assembly from generator set, paragraph 4.16.1.
c. Remove main rotor and attached rotating components, paragraph 4.30.1.
d. Remove exciter stator, paragraph 4.28.1.
e. Remove main stator, paragraph 4.31.1.
f. Remove bolts (39, FIGURE 4-15), Iockwashers (40), and plate (41) from housing assembly (10).
g. Remove bolts (42), Iockwashers (43), and screen (44) from housing (10).
h. Remove nuts (45) and (48), washer (46), Iockwashers (47) and (49), and grounding stud (50) from housing (10).
4.32.2 Installation.
a. Install grounding stud (50, FIGURE 4-15), Iockwashers (47) and (49), washer (46), and nuts (45) and (48) on hous-
ing (10).
b. Install screen (44) on housing (10) with bolts (42) and Iockwashers (44).
c. Install plate (41) on housing assembly (10) with screws (39) and Iockwashers (40).
d. Install exciter stator, paragraph 4.28.3.
e. Install main stator, paragraph 4.31.3.
f. Install main rotor and attached rotating components, paragraph 4.30.3.
g. Install generator assembly in generator set, paragraph 4.16.2.
4-56
