ARMY TM 9-6115-642-24P
AIR FORCE TO 35C2-3-456-14
MARINE CORPS TM 09247A109248A-24P/3
(1)
Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul of
an end item/equipment. Explanations of source codes follows:
Source Code
Explanation
PA
PB
PC
PD
PE
PF
PG
KD
KF
KB
Stocked items; use the applicable NSN to request/requisition items with these source codes. They are
authorized to the category indicated by the code entered in the 3rd position of the SMR code.
“NOTE: Items coded PC are subject to deterioration.
Items with these codes are not to be requested/requisitioned individually. They are part of a kit which is
authorized to the maintenance category indicated in the 3rd position of the SMR code. The complete kit
must be requisitioned and applied.
MO - (Made at Unit/AVUM
Level)
MF - (Made at DS/AVUM
Level)
MH - (Made at GS Level)
ML-
(Made at Specialized
Repair Activity (SRA))
MD - (Made at Depot)
AO - (Assembled by Unit/AVUM
Level)
AF-
(Assembled by DS/AVIM
Level)
AH - (Assembled by GS
Category)
AL -
(Assembled by SRA)
AD - (Assembled by Depot)
Items with these codes are not to be requested/requisitioned individually. They
must be made from bulk material which is identified by the part number in the
DESCRIPTION and USABLE ON CODE (UOC) column and listed in the Bulk
Material group of the repair parts list in this RPSTL If the item is authorized to
you by the 3rd position code of the SMR code, but the source code indicates it
is made at a higher level, order the item from the higher level of maintenance.
Items with these codes are not to be requested/ requisitioned individually. The
parts that make up the assembled item must be requisitioned or fabricated and
assembled at the level of maintenance indicated by the source code. If the 3rd
position code of the SMR code authorizes you to replace the item, but the
source code indicates the items are assembled at a higher level, order the item
from the higher level of maintenance.
XA - Do not requisition "XA-coded item. Order its next higher assembly. (Refer to the NOTE below.)
XB - If an "XB" item is not available from salvage, order it using the CAGEC and part number given.
XC - Installation drawing, diagram, instruction sheet, field service drawing, that is identified manufacturer's part number.
XD - Item is not stocked. Order an "XD"-coded item through normal supply channels using the CAGEC and part number
given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a source
of supply for items with the above source codes, except for those source coded
"XAN or those aircraft support items restricted by requirements of AR 750-1.
2
