ARMY TM 9-6115-642-24P
AIR FORCE TO 35C2-3-456-14
MARINE CORPS TM 09247A/109248A-24P/3
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
SECTION I. INTRODUCTION
1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special support equipment required for performance of unit, direct support and
general support maintenance of the Generator Set, 10 KW, 60/400 HZ. It authorizes the requisitioning, issue, and
disposition of spares, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR)
codes.
2. GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided into the
following sections:
a.
Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. This list also includes parts which must be removed for replacement of the authorized
parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group
listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence. Items are shown
in the associated illustration(s)/figure(s).
b.
Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE
column) for the performance of maintenance.
c.
Section IV. Cross-Reference Index. A list, in National Item Identification Number (NIIN) sequence, of all National
stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part numbers appearing
in the listings. National stock numbers and part numbers are cross referenced to each illustration figure and item number
appearance. The figure and item number index lists figure and item numbers in alphanumeric sequence and cross
references NSN, CAGEC and part number.
3. EXPLANATION OF COLUMNS (SECTIONS II AND III).
a.
ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b.
SM R Code (Column (?)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition
instruction, as shown in the following breakout:
Source
Maintenance
Recoverability
Code
Code
Code
XX
1st two
XX
XX
positions
How you get an item.
3d position
4th position
Who determines
disposition action
on an unservice-
Who can install,
Who can do
able item.
replace or use
complete repair
the item.
(see note) on
the item.
*Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the
"Repair" function in a use/user environment in order to restore serviceability to a failed item.
1
