ARMY TM 9-6115-642-24
AIR FORCE TO 35C2-3-455-12
MARINE CORPS TM 09247A/09248A-24/2
2-13 NATO SLAVE RECEPTACLE.
2-13.1
a.
b.
c.
d.
2-13.2
a.
b.
c.
d.
e.
f.
2-13.3
a.
b.
c.
d.
e.
f.
9.
Shut down generator set.
Open engine access doors and disconnect negative battery cable.
Inspect NATO SLAVE RECEPTACLE for security, corrosion, missing hardware, and other damage.
Connect negative battery cable and close engine access doors.
Removal.
Shut down generator set.
Open left side engine access door and disconnect negative battery cable.
Open right side engine access door, remove bolt (1, FIGURE 2-4), washer (2), and disconnect negative cable
terminal (3) from slave receptacle (9).
Remove bolt (5), washer (6), and disconnect positive cable terminal (3) from slave receptacle (9).
Remove bolts (7), nuts (8), and slave receptacle (9) from generator set housing.
Remove bolts (10), nut (11), and cap (12) from housing.
Insert slave receptacle (9, FIGURE 2-4) into generator set housing.
Secure slave receptacle (9) to generator set with bolts (7) and nuts (8).
Connect slave receptacle positive cable terminal (3) to slave receptacle (9) with bolt (5) and washer (6).
Connect negative cable terminal (3) to slave receptacle (9) with bolt (1) and washer (2).
Attach cap (12) to housing with bolt (10) and nut (11).
Slide cap (12) over slave receptacle (9).
Connect negative battery cable and close access doors.
2-14.1
a.
b.
2-14.2
a.
b.
c.
d.
e.
f.
g.
Shut down generator set.
Inspect battery charging alternator (9, FIGURE 2-5) for loose mounting hardware, damaged or loose electrical
connections, and other damage.
Testing.
Shut down generator set.
Inspect battery charging alternator (9, FIGURE 2-5) for loose connections.
Set multimeter for DC volts and connect between positive and negative terminals of alternator.
Start and operate generator set at rated frequency and voltage.
Multimeter reading should be between 27.5 and 29.5 VDC.
Shut down generator set.
Battery charging alternator is defective and requires replacement, if reading is other than above.
2-31
I n s p e c t i o n .
Installation
2-14 BATTERY CHARGING ALTERNATOR.
Inspection.
