SECTION V.
2-6 UNIT TROUBLESHOOTING PROCEDURES.
ARMY TM 9-6115-642-24
AIR FORCE TO 35C2-3-455-12
MARINE CORPS TM 09247A/09248A-24/2
TROUBLESHOOTING
2-6.1 Purpose of Troubleshooting TABLE. This section contains troubleshooting information for locating and correct-
ing operating troubles which may develop in the generator set. Each malfunction for an individual component, unit, or sys-
tem is followed by a list of tests or inspections which will help you to determine probable causes and corrective actions
to take. You should perform the tests/inspections and corrective actions in the order listed. This table cannot list all mal-
functions that may occur, nor all tests or inspections and corrective actions. If a malfunction is not listed or cannot be cor-
rected by listed corrective actions, notify your supervisor.
NOTE
Before you use this table, be sure you have performed your PMCS.
NOTE
Ensure operator level troubleshooting has been performed prior to performing unit level
troubleshooting.
NOTE
Refer to diagnostic conneotor TABLE 2-10, the Electrical Schematic F-1 and Wiring
Diagram FO-2 as troubleshooting aids.
2-11
