Turn the knurled section of the brake handle clockwise, taking up the slack in
g.
the linkage, until the brakes are fully applied when the brake handle is in the
"up" position.
Check that the brakes are fully released when the brake handle is in the "down"
h.
position.
If additional adjustments are required, make the adjustments at the rod and
l.
clevis connections of the brake linkage, as necessary.
FUEL BOOST PUMP.
7-17.
REMOVAL OF FUEL BOOST PUMP.
(See figure 5-1).
7-18.
Disconnect the electrical harness from fuel boost pump (25).
a.
Disconnect fuel lines (17, 20) from the boost pump.
Cover the open ends of the
b.
fuel lines.
Cover the open ports on the boost
Remove nipples (21) from the boost pump.
c.
pump.
d.
Remove nuts (27), washers (28), and screws (29) securing the boost pump to
bracket (38). Remove the pump from the bracket.
7-19. INSTALLATION OF FUEL BOOST PUMP. Installation of the fuel boost pump
is the reverse of removal. See figures 6-2 and 6-3 when connecting the electrical
harness to the fuel boost pump.
7-20. FUEL FILTER.
7-21. REMOVAL OF FUEL FILTER. (See figure 5-1).
a.
Disconnect fuel line (20) and hose assembly (22) from fuel filter (33).
Cap the
open end of the fuel line and hose.
b.
Remove reducers (23) and O-rings (24). Cover the open ports on the filter.
c.
Remove nuts (34), spacers (35), washers (36), and bolts (37) securing the filter
to support bracket (38). Remove the filter from the bracket.
7-22. DISASSEMBLY OF FUEL FILTER. (See figure 5-8).
a.
Remove filter case (1) from filter head (5).
7-8
