Inspection and Maintenance
Method
Interval
Item
d. Check all lines and fittings
visual
90 Days
Fuel Filter and
for stripped threads, and
Fuel Lines (Cont)
for security of attachment.
a. Inspect fuel tank for leaks.
90 Days
Visual
Fuel Tank
b. Check drain fittings for
damage and security of
attachment.
c. Check filler cap and dip-
stick for damage and for
loose fit on the filler neck.
d. Check dipstick for reada-
bility of measurement and
for security of attachment
to the filler cap.
90 Days
Visual
a. Check all nuts and bolts
Speed Increaser
for stripped threads, and
for security of attachment.
b. Remove cover from input
shaft housing. Check the
input shaft for cracks,
wear, chipped splines,
and chipped teeth.
c. Check oil sight glass for
leaks, cracks, and clear-
ness.
d. Check oil breather for
restricted vents.
e. Check oil filler cap and
fitting for stripped threads.
Figure 4-4.
Table of Periodic Inspection and Maintenance (Sheet 4 of 8)
4-6
