TM 5-6115-640-14&P
Section III. PRINCIPLES OF OPERATION
1-10. PRINCIPLES OF OPERATION.
Each Power Plant, AN/MJQ-32 or AN/MJQ-33, provides 3 kW, 60 Hz precise power from either one of two modified
generator sets. Power to the load equipment can be obtained through switch box terminals or directly from the
generators. The trailer can be towed over prepared roads at a maximum speed of 55 mph (88.5 km/h), and over
unimproved roads at a maximum speed of 30 mph (483. km/h).
1-11. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
Refer to figures 1-3 and 1-4 for the location of major components of the AN/MJQ- 32 and AN/MJQ-33. For components
not discussed in this paragraph, refer to TM5- 6115-615-12 for the generator set components and TM9-2330-202-14&P
for components of the trailer.
a. AN/MJQ-32 Power Plant (See Figure 1-3.)
(1)
STOWAGE RACK. Provides storage of antenna masts, supports, and accessories whenever power plant
is moved from site to site.
(2)
GENERATOR SET (REAR). One of two Acoustic Suppression Kit (ASK) generators which provide 3 kW,
60 Hz to load equipment.
(3)
SWITCH BOX Channels power from one of two generator sets to load equipment, depending on switch
setting.
(4)
FUEL CAN BRACKET. Provides mounting for fuel can during transportation. Two each.
(5)
FENDER/FENDER EXTENSION. Provides support and mounting for major components of power plant.
(6)
FIRE EXTINGUISHER BRACKET. Provides mounting for 5-pound fire extinguisher during transportation
of power plant.
(7)
ANTENNA MAST MOUNT. Provides support for antenna mast during transportation of power plant. Two
each.
(8)
DRIVER/PULLER HOLDER. Provides mounting for driver/puller.
(9)
ANTENNA MAST SUPPORT. Provides additional support for antenna mast during transportation of Power
Plant. Two each.
(10)
FUEL CAN BRACKET. See item 4.
(11)
LOAD CABLE BRACKET. Supports load-cable reel.
(12)
FUEL-ADAPTER HOLDER. Provides mounting for drum adapter.
Change 2 1-5
