TM 5-6115-640-14&P
Section II. EQUIPMENT DESCRIPTION AND DATA
1-7. DESCRIPTION.
Power Plants (PP's) AN/KJQ-32 and AN/KIQ-33 are each made up of two Tactical Utility Acoustic Suppression Kit (ASK)
Generator Sets DOD Model NEP-701A each mounted on a single modified M116A2 trailer. These generator sets are air-
cooled, diesel engine-driven units each with a load capacity of 3 kW at 69 Hz. Both PP trailers are two-wheeled units
modified to carry an approximate load of 3200 pounds. The AN/MJQ-32 PP has its two ASK generator sets mounted on
the fender/fender extensions of a modified M116A2 chassis (considered to be a nonstandard trailer). The AN/MJQ-33
PP has its dual ASK generator sets mounted on a flatbed cargo body of a modified M116A2 chassis (considered to be a
Standard trailer). The main difference between the two PP's is the storage rack assembly of the AN/KQ-32 which is used
to carry the antenna mast, mast kit, and mast extension kit (the AN/MJQ-33 does not contain a storage rack) and
tarpaulin and bows used on the AN/MJQ-33 (the AN/MJQ-32 does not contain a tarpaulin and bows). Output from either
PP is supplied to the system or equipment being powered through a 5-wire configuration switchbox located on each PP.
1-8. TABULATED DATA.
The tabulated data provides operator and unit level personnel with the dimensions and weights for power plants AN/KJQ-
32 and AN/&JQ-33. These specifications are computed from the combined dimensions and weights of the generator sets
and trailers as modified for use with the power plants. Specifications of the individual components can be found in their
respective technical publications. For additional information concerning the ASK Generator Set, DOD Model MEP-701A,
refer to TM5-6115-615-12 and -24P. For additional information on the MU16A2 trailer refer to TM9-2330-202-14&P. The
tabulated data also includes the location and content of all data plates unique to the power plants.
a. Identification and Information Plates.
(1)
AN/MJQ-32 power plant identification plate is located on rear section of curbside fender.
Figure 1-1. Identification Plate on AN/MJQ-32.
1-2