TM 5-6115-632-14&P
Figure 4-6. Accessory Box Replacement.
(3) Working under trailer, install one flat washer (2) and one nut (3) on each screw (1).
Tighten hardware to secure accessory box (4).
4-19.
Fire Extinguisher Bracket Replacement. (See figure 4-7.) The fire extinguisher supplied with
the power unit is carried in a bracket mounted on the rear of the trailer roadside fender.
a. Removal.
(1) Remove four screws (1, figure 4-7), four nuts (2), and four flat washers (3) securing
bracket (4) to fender(5).
(2) Remove bracket (4) from fender (5).
b. Installation.
(1) Position fire extinguisher bracket (4) on fender (5).
Figure 4-7. Fire Extinguisher Bracket Replacement.
(2) Insert four screws (1) down through bracket (4) and through fender (5).
4-15
