TM 5-6115-632-14&P
Figure 4-5. Fuel Can Bracket Replacement.
b. Installation.
(1) Position fuel can bracket (4) on fender (5).
(2) Insert four screws (1) down through bracket (4) and through fender (5).
(3) Install one washer (3) and one nut (2) onto each screw (1). Tighten hardware to secure
bracket (4).
4-18.
Accessory Box Replacement. (See figure 4-6.) The accessory box is mounted to the trailer
bed forward of the generator set.
a. Removal.
(1) Remove four screws (1, figure 4-6), four flat washers (2), and four nuts (3) securing
accessory box (4) to traiIer bed (5).
(2) Lift accessory box (4) off trailer (5).
b. Installation.
(1) Position accessory box (4) on trailer bed (5).
(2) Insert four screws (1) through accessory box mounting brackets and trailer bed (5).
4-14
