TM 5-6115-632-14&P
CHAPTER 3
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
3-1.
Consumable Supplies. Consumable supplies used in the maintenance and operation of the
power unit are listed in Table 3-1.
Table 3-1. Consumable Operating and Maintenance Supplies.
(1)
(2)
(3)
(4)
(5)
(6)
Qty
Qty
National
required
required
Component
stock
for initial
8 hours
application
number
Description
operation
operation
Notes
General
6850-00-664-5685
Solvent, Drycleaning,
1 quart
As required
Cleaning
P-D-680
Leg Prop
9150-00-190-0904
Grease, Automotive and
1 pound
As required
Assembly
Artillery, GAA
Leg Prop
9150-00-186-6681
Oil, Lubricating,
1 quart
As required
Assembly
OE/HDO-30
9150-00-402-4478
Oil, Lubricating, OEA
1 quart
As required
Section Il. LUBRICATION INSTRUCTIONS
3-2. General. Detailed instructions for the lubrication of the major components of the power unit are
contained in the applicable Lubrication Orders (LO’s). Refer to DA Pam 310-1 to ensure the latest
editions of the LO’s are used.
3.3. Generator Lubrication. Refer to TM 5-6115-585-12 for generator set Lubrication Order.
3-4. Trailer Lubrication. There are no operator/crew lubrication requirements for the power unit
trailer. However, the operator shall assist unit maintenance.
Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
NOTE
The PMCS chart in this section contains all necessary Operator/Crew
preventive maintenance checks and services for this equipment.
3.5. General. The preventive maintenance checks and services listed in Table 3-2 are grouped
according to stages of equipment operation or time intervals. Using the following as a guide, do the
checks and services at the intervals shown.
3-1
