Table 3.2. Operator/Crew Preventive Maintenance Checks and Services ()MCS) CONT.
B - Before
D - During
Item to be inspected.
Procedure: check for and
have repaired, filled, or
adjusted as needed.
Check for damaged or missing reflectors.
Check battery (35) electrolyte level. Level
should be about 3/4 inch above top of
plates. Add water if level is low. Use
clean water (distilled water if available).
Inspect and weigh fire extinguisher.
(See paragraph 3-11.)
Inspect entire chassis frame for damage,
cracks, and broken welds.
Check level of fluid in cooling system.
Proper level is 2 inches below overflow
pipe. Add coolant as required.
Equipment is not
Frame is obviously
broken or cracked.