ARMY TM 5-6115-625-14&P
Table 4-1. Unit Preventive Maintenance Checks and Services (PMCS). –CONT.
W -Weekly M - Monthly S - Semiannually A - Annually
(40 hours) (100 hours) (500 hours) (1000 hours)
I t em
no.
2
2
2
3
2
4
2
5
2
7
2
8
H – Hours of operation
(As indicated)
Interval
Item to be
Inspected
Wheels and Tires
Brakes
Wheel Bearings
Hydraulic Brake
Hoses and Fittings
Brake Master
Trailer Road Test
Procedures
a.
b.
a.
b.
c .
d.
Check serviceability of tires as
indicated in TM 9-2610-220-24.
Tighten wheel stud nuts to 450 to
500 ft-lb (611 to 678 N.m).
Inspect brake linings for wear. Replace
if brake shoe lining is less than
1/8-inch (3.2 mm) thick.
Inspect brake adjusting screw, retaining
pins, springs, and clips for corrosion
and wear.
Inspect hydraulic wheel cylinders for
leaks,
Adjust brakes.
Clean and repack wheel bearings.
Inspect for dents, cracks, loose connections
and leaks.
Check fluid level. Fill to 1/2 inch from
t o p .
Perform road test paying special attention
to items that were repaired or adjusted,
in accordance with TM 9-2330-205-14&P.
4 - 1 2
C h a n g e 1
