TM 5-6115-365-15
C2
Section II. OPERATING INSTRUCTIONS
18-3. Setting-up Instructions
a.
Leveling.
(1)
Locate the trailer on as level a surface as
possible in order for the generator sets to operate
efficiently.
(2)
Set brakes and block wheels securely to
prevent any movement. Operate the handbrake at
weekly intervals to assure freedom of linkage.
(3)
Pull leg support down and adjust length
for firm contact with ground.
WARNING
Wheels must be blocked, brakes set,
and leg support down in support
position before attempting to roll up
tarpaulin and before starting to
assemble or set-up equipment for
operation.
b.
Preparation for Starting.
(1)
Roll up tarpaulin and remove the bows
and racks (Fig. 18-2).
(2)
Open trailer tailgate and remove all loose
auxiliary items and anything else that might block the
free circulation of air through the trailer and around
generator sets.
CAUTION
It is of foremost importance that
there be free circulation of air around
the generator set at all times during
operation. inadequate ventilation is a
major cause of damage to equipment.
Figure 18-2. Racks, removal and installation.
18-3
