TM 3-1040-280-20&P
2-19.
SMOKE GENERATOR SET COMPONENTS (CONT).
e.
Fog Oil Tank Assembly (Cont).
INSTALLATION
a.
Apply a layer of plastic strip (8) to fog oil tank assembly mounting surface on frame assembly (7). Cut out six
mounting holes in plastic strip with knife.
b.
Position fog oil tank assembly (3) on frame assembly with fuel cap (9) to rear of vehicle. Secure fog oil tank
assembly with 6 screws (4), 12 washers (5), and 6 nuts (6).
c.
Remove adapter (10) and cap (11) from fog oil tank and install check valve (1).
d.
Remove protective plugs (12) from fog oil tank supply and return ports (13) and install fog oil pump assembly (p
2-51).
e.
Install generator bracket (p 2-21) and smoke generator (p 2-47).
2-56
