TM 3-1040-280-20&P
2-19.
SMOKE GENERATOR SET COMPONENTS (CONT).
d.
Air Compressor Assembly (Cont).
INSTALLATION
a.
Attach air compressor assembly (2) to mounting plate (9) with 11 screws (11), 22 washers (12), and 11 nuts (13).
b.
Position mounting plate (9) over mounting holes in generator support angles (10) with air compressor tank to
front of vehicle.
c.
Secure mounting plate (9) to generator support angles (10) with four screws (6), eight washers,(7), and four nuts
(8).
2
a.
Connect air hose assemblies (4) to quick-
disconnect fittings (5) on air compressor tank.
b.
Connect cable assembly (1) to connector 2J1 on
air compressor assembly (2).
c.
Reinstall generator bracket (p 2-21) and smoke
generator (p 2-47).
U.S. GOVERNMENT PRINTING OFFICE:1990-743-049:20153
Change 1
2-54
